Following are the tools and raw materials required for the making of the wooden name plates:
• Coping Saw: It is used to cut as per the curves of the names.
• Scale: It is used to measure the length required for the name plate.
• Pencil: It is used to draw the outlines of name plates with measurements.
• Pen: It is used to write the names on the piece of wood or beading.
• Beading/ Small Pieces of Wood: It is used as a base material for the name plates.
• Sand Paper: It is used to smooth the surface of the nameplates after cutting.
• Nose Plier: It is used to immerse the name plates in the wood polish and also used to tighten the rings.
• Rings: It is used for making the name plates as key chains.
• Wooden Board: It is used as a writing placemat in which the wooden pieces are written.
• Glue (Adhesive): It is used to stick the two pieces of wood firmly.
• Stand: It is made by the craftsman for easy curve cutting of the name plates.
• Hand Drill: It is used to drill hole in the name plates for key chain purpose.
• Sandpaper: It is used to make the surface of the wood smooth after carving.
• Wood Polish: It is used to give shinning and plane finish on the wood surface.
